Weber Saint-Gobain - Official website of the company

weber.prim Plaskey WB250

weber.prim Plaskey WB250

weber.prim Plaskey WB250
weber.prim Plaskey WB250

Product benefits

  • All purpose preparation for tiling.
  • Waterproofing properties.
  • Easy to apply.
  • Creates a mechanical and chemical bond for the adhesive.

weber.prim Plaskey WB250 is a cement-based primer and surface preparation material which is suitable for interior and exterior use. This product is designed for wall and floor applications. weber.prim Plaskey WB250 is specially formulated to provide an excellent water resistant, all purpose preparation for tiling.

Product Features

Use

It is suitable for interior and exterior use.

  • Suitable for wall and floor applications.
  • weber.prim Plaskey WB250 is specially formulated to provide an excellent water resistant, all purpose surface preparation for tiling.
  • It can be applied onto friable timber, smooth, previously painted and Gypsum plastered surfaces.
  • weber.prim Plaskey WB250 must be mixed with weber.ad Key-it WB117.

Features and Benefits

  • All purpose preparation for tiling.
  • Waterproofing properties.
  • Easy to apply.
  • Creates a mechanical and chemical bond for the adhesive.

Technical Data

  • Shelf life: 9 months in dry moderate conditions
  • Pot life: 1 hour
  • Coverage: 24m2 per 20kg bag at 1,5 mm - 2 mm thickness
  • Curing: Allow to dry for at least 24 hours before applying tiling, screeds and plasters

Documentation

Send or download the documentation

You can either send the documentation to an email address, or download it.

Preparation & Application

Mixing and application

  • Gradually mix 20 kg of weber.prim Plaskey WB250 to not more than 10 litres of weber.ad Key-it WB117.
  • Mix thoroughly to a paintable consistency.
  • For increased plasticity allow mix to gel for 5 minutes.
  • Remix before use.
  • Apply with a builders block brush or a large paint brush to ± 2mm thickness ensuring that full coverage is achieved.
  • Allow to dry for at least 24 hours before tiling commences.

Packaging, Health & Safety

General

  • weber.prim Plaskey WB250 base coat should not be applied externally when there is a risk of rain or frost within 6 hours of application.
  • Equipment should be cleaned with water immediately after the application has been completed.

Packaging

weber.prim Plaskey WB250 is supplied in 20 kg bags.

Safety Instructions

Contains cement, which is alkaline when wet and can cause skin irritation. Use eye protection and gloves and avoid prolonged skin contact. Avoid inhalation of dust. Wash skin contamination away with warm soapy water. Remove splashes to the eyes by prolonged irrigation and consult a doctor. Do not ingest.