tylon® WB11 Ceramic
20 kg
24 hr adhesive for all ceramic tiles
Weber-tylon® WB11 Ceramic is a grey general purpose cement‑based adhesive for fixing light weight or soft baked ceramic wall and floor tiles in interior and external installations. This adhesive has an 8‑hour pot life and designed for easy application.
Suitable for use on surfaces like꞉
- Cement‑based plaster
- Cement screeds
- Concrete surfaces
Coverage
- Wall tiling ‑ 6 m per 20 kg bag when applied using a 6 mm notched trowel
- Floor tiling ‑ 4 m per 20 kg bag when applied using a 10 mm notched trowel
| Initial setting time | approximately 12 hours |
| Final setting time | approximately 24 hours |
| Correction time | approximately 20 minutes |
| Pot life | approximately 8 hours |
| Grouting time | approximately 24 hours |
| Water demand | approximately 5 litres per 20 kg |
| Temperature resistance | 70 °C |
| Application temperatures | Do not apply in temperatures below 5 °C or above 30 °C |
| Note꞉ all the data given was obtained at a temperature of 23ºC and 50% relative humidity. WB11 is designed to meet the following SANS 52004 related performance values.Note꞉ all the data given was obtained at a temperature of 23ºC and 50% relative humidity. WB11 is designed to meet the following SANS 52004 related performance values. | |
| Reaction to fire | Class A1/A1 |
| Initial tensile strength | > 0.5 N/mm² |
| Tensile adhesion strength after heat ageing | > 0.5 N/mm² |
| Tensile adhesion strength after water immersion | > 0.5 N/mm² |
| Open time꞉ tensile adhesion strength (after no less than 20 min) | > 0.5 N/mm² |
- 24-hour set
- Interior and exterior application
- Suitable for wall and floor use
Uses
- Suitable for fixing lightweight or soft baked glazed ceramic wall & floor tiles to cement plaster, screeds, and concrete surfaces.
- Interior & Exterior use
- Suitable for wall and floors
- 8 hr pot life
